MA-106A
MA-106A
MA-106A is Public Address Amplifier which can be used conveniently in a small complex where needs amplification of BGM playback and voice such as a lecture room, training institute, restaurant, cafe with 1U size compact design and function. The main feature is high reliability, low weight, and low heating through high efficient digital amp circuit. MIC or Line input is available depends on operating environment. There is a built-in 1W AMP output separately with 60W Main Amp Output. Also, there are bass and treble controls, MUTE priority function,Phantom Mic Power to make high convenience in diverse environment. Lastly, it's possible to reduce standby power effectively by automatically converting to Master System Standby Mode without input signal for 25 Min.
Description
- 1U Size Compact Design - Easy installation and product operation with 1U Size Compact Design and function.
- Digital Amp Circuit - 60W High Efficiency Digital Amp Circuit/ High reliability, Low weight, Low heating
- SMPS Power Circuit - Low power and weight through stable SMPS Power Circuit
- Separate 1W AMP output - Built-in 1W AMP output separately with 60W main amp output
- Built-in Mix Configuration Dip switches which is possible to set up diverse function - Connection each input, MUTE PRIORITY Function, Phantom Mic Power.
- Master System Standby Mode - Without input signal for 25 Min, automatically converted to Master System Standby Mode.
z-z1717711359683.webp)
| Rated Output Power (T.H.D 1%) | 60W (RMS) | |
| Output Voltage / Impedance | 4Ω/16V, 82Ω/70V, 167Ω/100V | |
| Frequency Response (1W@1kHz) | Input 1, 2, 3 | +/-3dB, 80Hz-15kHz |
| T.H.D. (60W@1kHz) | Less Than 1% | |
| S/N Ratio (60W@1kHz A-weighted) | Input 1, 2, 3 | Better Than 70dB |
| Input Sensitivity | Input 1 | -10dBV to -50dBV |
| Input 2, 3 | 0dBV to -20dBV | |
| Tone Control | Bass (100Hz) | ±10dB |
| Treble (10kHz) | ±10dB | |
| Residual Noise (Input 1-3 vol min, tone at center) | Master Volume Min: -65dB / Master Volume Max: -55dB | |
| Zone 2 Output | Rated Output Power 8Ω(RMS, THD 3%): 1W / Bal 600Ω: 2.4V | |
| Pre Out Output (-10dBV Input) | 0dBV | |
| Mix Configuration Switches | SW1 | Zone 2 Assign Input 1 |
| SW2 | Zone 2 Assign Input 2 | |
| SW3 | Zone 2 Assign Input 3 | |
| SW4 | VOX Trigger Input 1 | |
| SW5 | VOX Trigger Input 2 | |
| SW6 | Mute Link Input 2 & 3 | |
| SW7 | Low-Cut, 400Hz 6dB/Oct. | |
| SW8 | Input 1 Phantom Power, +18V | |
| Manual Mute Contact Closure | Pin 1 & G (Same as operating status of Input 1 Mute Trigger) | |
| Master System Standby Contact Closure | Pin G & 2 (Same as Power Standby mode status) | |
| Operating Temperature | -10℃ ~ +40℃ | |
| Power Source | AC100V-120V/220V-240V, 50/60Hz | |
| Power Consumption | 24W | |
| Weight(Set) | 3.1kg | |
| Dimension(Set) | 300(W) x 44(H) x 230(D)mm |